DESMA Horizontal Machines

The DESMA 969 series of horizontal injection molding machines allows the user a broad range of possibilities to automate the production of molded rubber parts. Automation equipment with brushing, spraying and cleaning modules as well as grippers, knock out plates, robots and other peripheral equipment can be mounted above the machine. Partially or fully automatic production of moldings is made feasible even in case of difficult part geometries. This has the advantage not only in saving labor costs, and in giving more consistent parts, but also in increasing productivity through the reduction of cycle times. DESMA produces the 969 series in standard sizes up to 700 metric tons (785 US tons). Injection units are available in sizes up to 25,000 cm for working with multi-cavity molds or for producing large-size moldings. All of DESMA’s horizontal machines feature full hydraulic clamping units.

FEATURES OF THE DESMA 969 Z MODEL

Ergonomic machine design combined with a wide choice of special clamping forces offers you the right solution for every application and optimal conditions for large-scale series. Complemented by DESMA's patented systems DESFLEX® and the needle-shaped shut-off cold runner as well as through innovative DESMA-injection molds, a production system without runners and/ or without rework becomes feasible. Ultramodern automation systems enable reliable full-automatic productions.

• Stable structure of the clamping unit due to 4-column design

• Hydraulic lifting devices guided on tie bars

• As an option, frame with guiding fitted round the tie bars for installation of central cold runner block for two-deck production

• Alternatively injection system FIFO C or FIFO B are available

• Electrically driven automation equipment with demolding control

• For manual operations easy access to all areas of the clamping unit

		The new D 969.100 Z completes the horizontal machine series downwards.
		Very established in the market with 1,600 kN clamping force.
		The D 969.260 and D 969.300 with 2,600 kN respectively 3,000 kN are typical machines of precision articles such as profile seals and O-rings. An optimum result is possible due to the very high specific surface pressure and due to injection pressures amounting up to 2,800 bar.
		Best seller among the horizontal machines: The D 969.400 Z with automation
		Up to 8,000 kN clamping force (pressure increased) and 25,000 cm³ injection volume are perfect conditions for your fully automatic large-scale production. A stable machine base, also for extremely heavy moulds, goes without saying.

>> Data sheet To view the data sheet in pfd-format, the Adobe Reader is required. Just click on the logo stated below to load it down.