Skip to navigation Skip to content
- DRC1020 Control
- With 800 ccm / 2150 bar FIFO “A” injection unit
- Heating platen 400 x 500 mm
- Clamping force 1000 kN
- Hydraulic lifting device movable platen, stroke 300 mm
- Hydraulic lifting device fixed platen, stroke 300 mm
- Vacuum device 25 m³/h
- 2 Temperature Control Units TEE 140-O-4.5/ES for injection unit
- Light Safety guarding front of clamping unit, Pos. A
- DRC 2020 Control
- With 3300ccm / 2150 bar FIFO “A” injection bar
- Heating platen 560 x 630 mm
- Clamping force 2700 kN
- Hydraulic lifting device fixed platen, stroke 250 mm
- Hydraulic lifting device movable platen, stroke 250 mm, with rack and pinion
- Vacuum pump 25 m³/h
- 2 Temperature Control Units TEE 140-O-4.5/ES
- Light Safety guarding front of clamping unit Pos. A
- 3 Zone heating
- DRC 2020 HT control
- With 6600 ccm / 2060 bar FIFO “A” injection unit
- Heating platen 810 x 1100 mm
- Clamping force 6300 kN
- Hydraulic lifting device movable platen, stroke 400 mm
- Hydraulic lifting device fixed platen, 600 mm
- Vacuum pump 63 m³/h
- 3 (Three) Temperature Control Units TEE 140-O-4.5/ES
- Preparation for 2 Temperature Control Units (water) for cold runner
- 2 addl. Heating zones 1 RK, 1-ph., 3 kW
- Preparation to install demolding table with 1150 mm stroke
- Scanner + safety fence at Pos. A
- Power 460 V / 3-phase / PE / 60 Hz
- DRC 2020 control
- With 3300 ccm/2180 bar FIFO “A” injection unit
- Heating platen 670 x 940 mm
- Clamping force 5000 kN
- Hydraulic lifting device movable platen, stroke 400 mm
- Safety Fence with Scanner front of clamping unit Pos. A
- Safety fence in rear of clamping unit, Pos. C
- Vacuum pump 63 m³/h
- 2 Temperature control units TEE 140-O-4.5/ES for injection unit
- Preparation for 2 Temperature Control Units for CRB (Oil)
- Power 460 V / 3-phase / PE / 60 Hz
- DRC 2020 control
- With 6600 ccm/2060 bar FIFO “A” injection unit
- Heating platen 900 x 1100 mm
- Hydraulic lifting device fixed platen, stroke 600 mm
- Hydraulic lifting device movable platen, stroke 400 mm
- Extended tie bars 150 mm on clamping unit
- Extended stroke 150 mm for movable clamping unit platen
- Light safety guarding front of clamping unit, Pos. A
- Movable safety gate in rear of clamping unit, Pos. C
- Vacuum pump 63 m³/h
- 3 Temperature control units TEE 140-O-4.5/ES for injection unit
- Preparation for 2 Temperature Control Units for CRB (Water)
- 2 x additional heating zones 1 RK, 2-ph., 3 kW
- Power 460 V / 3-phase / PE / 60 Hz
